Banks Power Ram-Air Intake Systems

2007.5-2010 6.6L GM Duramax LMM

OC DIESEL Part Number BA 42172 (Banks Power Ram-Air Intake System) applies to the GM Duramax Diesel equipped with a 6.6L engine from vehicle manufactured date ranging 2007.5 to 2010

Others build and ship without testing. Not Banks. Our Ram-Air Intakes start out as CAD software prototypes and are put through flow simulations. The design is refined until the simulation shows optimal performance. Then a hardware prototype is made and the design is validated on a flowbench. After that comes dyno testing and on-vehicle testing. It takes a superior design to pass all those tests.

Banks Ram-Air is the only aftermarket intake with bellows. This accommodates engine movement and prevents component damage for longer service life.

Banks Power Ram-Air Intake System – Features and Benefits

• Extensively tested & validated
• Increases power & fuel economy
• Reduces exhaust gas temps (EGTs) & smoke
• Outflows stock & competitors up to 57%

Banks Power Ram-Air Intake Upgrade Vs. Stock

Give us a call at 714-848-2170 M-F from 8-5 PST – We will answer your questions regarding the Banks Power Ram-Air Intake System. Ask about Free Shipping!

Live locally? Feel free to stop by our location and meet us! OC DIESEL, INC. is located at 17242 Gothard Street, Huntington Beach, CA 92647 Suites A and B. In addition to carrying Banks Power Ram-Air Intake System, we have a full service shop staffed with knowledgeable technicians who are ready to squash any Diesel Repair issues.

aFe Cold Air Intakes… Stage 1 or Stage 2? What’s the difference?

One of the first questions I  get about aFe Cold Air Intakes is “What’s the difference between Stage 1 intakes and Stage 2 intakes?”. The answer to the question is simple…  Stage 1 intakes replace the stock air box only and Stage 2 intakes replace the stock air box and the stock  intake tract.

Let’s ask a few questions…

1. How much power do you want?

Stage 1 intakes: Because it is not replacing the entire intake tract can give 1-10 horsepower and 10-20 foot-pounds of torque.

Stage 2 intakes: Because it is replacing the entire stock intake tract will give a significantly higher boost of 20-40 horsepower and 35-60 foot-pounds of torque.

2. How much money do you want to spend?

Stage 1 intakes: Because you are only replacing the air box you are going to spend a bit less. You’re also going to do less installing the system.

Stage 2 intakes:  You’re going to spend a bit more on this system because it replaces the stock intake tract. But, you get much higher gains.

3. What features do you need?

Stage 1 intakes: These will give you noticeable low-end torque gains. This air box will also provide you with a great engine noise improvement.

Stage 2 intakes: These will give you huge low-end torque gains and maximum horsepower gains. The open element to this system means a throaty sound with a mean growl.

Both systems are pretty easy to install at home in under 2 hours. They both use stock mounting points, work with stock electronics and do not interfere with the M.A.F. sensor. Both systems are a great way to add easy gains where it counts in a short period of time.

Give us a call at 714-848-2170 M-F from 8-5 PST – We will answer your questions regarding the aFe Cold Air Intakes. Ask about Free Shipping!

Live locally? Feel free to stop by our location and meet us! OC DIESEL, INC. is located at 17242 Gothard Street, Huntington Beach, CA 92647 Suites A and B. In addition to carrying aFe Cold Air Intakes, we have a full service shop staffed with knowledgeable technicians who are ready to squash any Diesel Repair issues.

aFe Intake Systems for Ford Powerstroke

If you have a Ford Powerstroke under your hood and you’re still working with your stock air intake system then you should consider one of aFe’s MAGNUM Force Air Intake Systems for Ford Powerstroke. These high quality air intake systems will provide you with greater engine efficiency and power gains with minimal effort on your part.

At aFe their engineers make sure to design their intakes to install using all stock mounting spots. They do not interfere with the MAF sensor. They always make sure their systems work with all stock electronics.

aFe offers a superb line of Cold Air Intake Systems for your Ford Powerstroke in 3 Stages:

Stage 1:

• 1-10 horsepower gain and 10-20 LB-FT torque gain
• For great value and easy installation
• Adds instant horsepower and torque
• Quality performance you can trust
• Installs in as little as 30 minutes!

Stage 2:

• 20-40 horsepower gain and 35-60 LB-FT torque gain
• For the largest possible performance gains
• Replaces entire air box and intake tract
• DYNO-proven performance
• Installs in as little as 45 minutes!

Stage 2Si:

• 11-19 HP gain and 20-40 FT-LB  torque gain
• For the consumer wanting to maintain a factory appearance
• Sealed air box provides quiet power
• Industry-leading power gains
• Installs in as little as 45 minutes!

Give us a call at 714-848-2170 M-F from 8-5 PST – We will answer your questions regarding ` aFe’s MAGNUM Force Air Intake Systems. Ask about Free Shipping!

Live locally? Feel free to stop by our location and meet us! OC DIESEL, INC. is located at 17242 Gothard Street, Huntington Beach, CA 92647 Suites A and B. In addition to carrying aFe’s MAGNUM Force Air Intake Systems, we have a full service shop staffed with knowledgeable technicians who are ready to squash any Diesel Repair issues.