BladeRunner Air Intake Manifold for the 99.5-03 Ford Powerstroke 7.3L 46-10061

BladeRunner Air Intake Manifold

Ford Powerstroke 7.3L (1999.5-2003) F-Series

The Bladerunner intake manifold represents the next generation in intake manifold design. The Bladerunner intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformities. the Bladerunner comes with up to 5 ports for nitrous injections, gauges and other accessories used by hardcore enthusiasts.

Stock intake manifolds have sharp bends and corners. As air flows around these corners, dead air zones are created. These dead air zones choke down the air and restrict airflow to your engine.

Features and Benefits:

• ○ Lower exhaust gas temperature (EGT)
• ○ Unique airflow path with MDV Technology
• ○ Proprietary internal bolt design – quaranteed to not deform and leak
• ○ Cast A356-T6 aluminum construction
• ○ Up to five port pads
• ○ Custom black-zinc finished steel bracket for OE wire harness
• ○ Faster turbo spool-up
• ○ More horsepower!
• ○ Increased low-end torque for more towing power!
• ○ Intake Manifold up to 18% flow increase!
• ○ Turbo Outlet Manifold up to 15% flow increase!
• ○ Improved boost pressure
• ○ Stainless steel hardware
• ○ 1/8″ NPT pre-tapped threads
• ○ Direct bolt on

Available Upgrades:

Stage 2 Air Intakes:

51-10192 – PDS
54-10192 – P5R
75-10192 – PG7

Turbo-Back Exhaust Systems:

49-13002 – Aluminized

49-43002 – 409 SS

Give us a call at 714-848-2170 M-F from 8-5 PST – We will answer your questions regarding the Bladerunner intake manifold. Ask about Free Shipping!

Live locally? Feel free to stop by our location and meet us! OC DIESEL, INC. is located at 17242 Gothard Street, Huntington Beach, CA 92647 Suites A and B. In addition to carrying Bladerunner intake manifold, we have a full service shop staffed with knowledgeable technicians who are ready to squash any Diesel Repair issues.

With the average Ford Powerstroke 7.3L injector needing rebuild at around 125K, why not add some extra power at the same time?

Stage 2 – 100 Horsepower Injectors from Dynomite Diesel

Ford Powerstroke 7.3L (1994-1997)

 

 

Dynomite Diesel Performance Products 7.3 Liter Ford injectors are engineered to give you optimum power and increased fuel mileage. With the average 7.3 injector needing rebuild at around 125K, why not add some extra power at the same time. New and remanufactured injectors are available. Whether you tow or Hot Rod your truck, DDP Injectors is the answer to reliable power.

These injectors will give you 100 horsepower at the wheels.  You can use these with a stock turbo, but DDP does recommend an upgraded one.  An intercooler is mandatory with this set if you tow, and highly recommended if you do not.  They will be hot until you get the intercooler!  No high-pressure oil pump will be required.

In most cases, mileage will increase 1-2 mpg and sometimes even more depending on the condition of your current injectors.  Please allow some time for the excitement to wear off before calculating mileage.

These injectors are brand new Alliant Power injectors that we modify and then provide to you with a warranty.  DDP warranty is 3 years unlimited mileage, so if you have a problem within 3 years, they will take care of you.  The only things they do not cover are abuse, fuel contamination, improper install or misapplication.

Features and Benefits:

• Better Mileage
• More Horsepower
• Smooth idle
• Less smoke
• Lower EGT’s
• Less warranty hassle
• The best warranty in the business
• 30 day money back guarantee

Give us a call at 714-848-2170 M-F from 8-5 PST – We will answer your questions regarding the Dynomite Diesel Performance Products . Ask about Free Shipping!

Live locally? Feel free to stop by our location and meet us! OC DIESEL, INC. is located at 17242 Gothard Street, Huntington Beach, CA 92647 Suites A and B. In addition to carrying Dynomite Diesel Performance Products , we have a full service shop staffed with knowledgeable technicians who are ready to squash any Diesel Repair issues.

Banks High-Ram Intake Improves Response & MPG

How airflow restrictions waste power

• Intake Restrictions cause engines to work harder.
• Exhaust back pressure generates a massive engine heat-load
• To expel exhaust power is taken from the crankshaft
• The cooling fans will run more, taking power and making noise
• Increased friction from hot, degrading lubricants
• Gasoline-vehicle makers mask poor-airflow problems (eg. detonation) with overly-rich fuel
• Excess fuel is wasted, worsening mileage and emissions
• Inadequate airflow chokes engine’s potential

Larger & less restrictive than the puny stock air intake, Banks High-Ram allows a greater flow of oxygen-rich air into the cylinders for instant torque & responsiveness + greater fuel economy.

Cooler, denser air packs real power. That’s an absolute fact. So why would you choke off all that power-packed air at the last second on its way from the intercooler to the intake manifold? That’s exactly what the stock air intake does.

The 3 inch Banks High-Ram changes all that. Designed on the computer using computational fluid dynamics, tested on the flow bench and proved on the dyno, High-Ram is much more than just another pretty air inlet. For even greater airflow with more power and improved throttle response, step-up to the 3 1/2 inch Banks High-Ram system with Boost Tube.

Above: Notice how cramped and angular the factory inlet is

compared to Banks’ larger, streamlined cast-metal High-Ram

Give us a call at 714-848-2170 M-F from 8-5 PST – We will answer your questions regarding the Banks High-Ram. Ask about Free Shipping!

Live locally? Feel free to stop by our location and meet us! OC DIESEL, INC. is located at 17242 Gothard Street, Huntington Beach, CA 92647 Suites A and B. In addition to carrying Banks High-Ram, we have a full service shop staffed with knowledgeable technicians who are ready to squash any Diesel Repair issues.

How Often Should I Clean and Service My S&B Filter?

The capacity of an air filter is directly related to how often you must service your filter. Capacity is defined as the total amount of contaminants/dirt particles that the filter will hold before reaching its termination point. The termination point is a predefined restriction number that is used as the cut-off point when measuring how much dirt a filter will hold. For typical passenger cars and light-duty trucks, 10” H2O is used at the termination point.

In OE applications, a new filter must be purchased every time the filter reaches maximum capacity. Not only is this costly, but it also creates unnecessary environmental waste. When an S&B intake kit or performance air filter is installed, you simply clean and re-oil the air filter per S&B’s specifications. Keep in mind that the conditions that the vehicle is operated under will determine how quickly it will take a specific filter to reach its capacity. With this being said, you can compare the ISO 5011 test results to find the difference in capacities for the OE air filter and the S&B air filter on the Orange County Diesel website just look up the part and click on the “extended information” tab.

The spreadsheet below is the Service Factor for each filter, this compares how the frequency of Servicing the Filter is affected. For example, if the S&B filter capacity is half that of the OE filter, the Service Factor is twice that of the OE filter. Simply put, you will have to clean the S&B filter in half the time you would normally take for an OE filter to load.

It is extremely important to clean and oil your filter correctly. Instructions, oil amounts and other pertinent information regarding S&B filters can be seen on the Orange County Diesel website in the description of each filter or intake and can also be found in the manual for the product under the “extended information” tab.

Give us a call at 714-848-2170 M-F from 8-5 PST – We will answer your questions regarding  S&B filters. Ask about Free Shipping!

Live locally? Feel free to stop by our location and meet us! OC DIESEL, INC. is located at 17242 Gothard Street, Huntington Beach, CA 92647 Suites A and B. In addition to carrying S&B filters, we have a full service shop staffed with knowledgeable technicians who are ready to squash any Diesel Repair issues.

S&B Performance Intake Kit? How much horsepower will I see? Will it increase fuel economy?

Horsepower can be increased by increasing airflow to the vehicle’s engine. Typically, the OE stock air box and induction tube significantly restrict the airflow. S&B design’s its intake kits to increase the amount of horsepower by 5-10% by allowing the engine to breathe easier.

S&B does not publish horsepower results specific to each part because the majority of our competition makes outrageous horsepower claims that are unsupported and often are accompanied by the disclaimer “Up To, As Much As, or Results May Vary.” There is no standard for dyno testing, it is difficult to hold our competition accountable for their inflated claims. S&B utilizes its 1/2 million dollar, climate controlled lab to test its intake kits and filters to the same standard (ISO 5011 Test Standard) used by the OE manufacturers, so there is substance behind S&B’s test results.

S&B publishes 2 critical results: airflow & efficiency

1. Airflow Rating: This rating shows how much the filter/intake improves the airflow vs. stock. Improving the airflow results in more power and better fuel economy.

2. Efficiency Rating: Protecting your engine while dramatically improving the airflow is S&B’s competitive advantage which is why we post the efficiency numbers along with the airflow rating. The efficiency rating shows how much dirt our filters will stop. Our minimum goal for efficiency is 99.0%.

Question:
Will an S&B cold air intake kit provide me with an improvement in fuel economy?

Answer:
The simple answer is yes. By lowering the restriction level vs. stock, the S&B intake allows the engine to work more efficiently which will improve fuel economy.

According to the Department of Energy, a dirty air filter will have an adverse affect on fuel economy. Fueleconomy.gov states that replacing a clogged air filter can improve your car’s gas mileage by as much as 10 percent.  The reason a clean filter improves fuel economy is because it is less restrictive than a dirty filter, so the engine works less to consume the air it needs. This S&B intake kit is substantially less restrictive than the OE induction system with a clean filter installed thus allowing the engine to breather even easier which results in better fuel economy. S&B does not make a specific claim with regards to fuel economy because there are too many factors that can affect your miles per gallon.

Give us a call at 714-848-2170 M-F from 8-5 PST – We will answer your questions regarding the S&B cold air intake kit. Ask about Free Shipping!

Live locally? Feel free to stop by our location and meet us! OC DIESEL, INC. is located at 17242 Gothard Street, Huntington Beach, CA 92647 Suites A and B. In addition to carrying S&B cold air intake kit, we have a full service shop staffed with knowledgeable technicians who are ready to squash any Diesel Repair issues.

;