OC DIESEL Part Number SCT 3416 (SCT SF3 Power Flash General Motors Programmer) applies to the 6.6L GM Duramax LLY, LBZ ranging from vehicle manufactured dates 2006-2008.
The SF3 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE! Programming your vehicle with one of SCT’s pre-loaded performance or fuel economy tune files is as easy as 1-2-3. Simply plug the OBDII connector into your vehicle’s OBDII port, select the pre-loaded tune file using the simple to navigate menu and within minutes the SF3 programs your vehicle.
With a HUGE Backlit display, the SCT SF3 Power Flash makes it EASY to read the Built-In Data Logging or Real Time Monitored Vehicle Data, view popular sensor data such as EGT, Air / Fuel Ratio or any other 0-5 Volt source! The SF3 Power Flash device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock PCM program. Restoring your vehicle to the stock PCM program is as easy as selecting Return to Stock from the device menu.
SCT SF3 Power Flash Features
- Increases Horsepower & Torque!
- Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage.
- Stores 3 Custom Tunes
- Stores up to 3 custom tune files created by your local SCT Custom Tuning Dealer.
- High Speed Datalogging / Monitoring
- View & record your vehicles PCM data on the LCD screen or on your laptop.
- Easy Restoration Back to Stock
- Stores your vehicles factory tune file for easy restoration back to the stock program.
- Most Popular Vehicles Supported
- Most popular Ford vehicles supported including 2011 models.
- USB Interface Cable Included
- USB Interface Cable & Livelink Data logging software included
- Pre-Loaded Dyno Proven Tunes*
- Pre-loaded with dyno proven performance tune files. *Not available for all vehicles. Contact Technical Support to verify there is pre-loaded tunes available for your vehicle.
- Huge Backlit LCD Display
- Huge back lit LCD display for easy viewing, day or night.
- Reads/Clears DTC Trouble Codes
- Reads and clears diagnostic trouble codes quickly & easily, saving on expensive diagnostic fees.
- Dual Analog Inputs
- Monitor EGT temps, air-fuel ratio and other popular sensor data.
- Installs Quickly & Easily
- Installs in minutes via your vehicle’s ODB-II port
- User Adjustable Vehicle Parameters
- Adjust for common performance bolt-ons such as Cold Air Kits, Exhaust Systems & Gears
Pre-Loaded Tune File Adjustable Options
*Adjustable Options may vary for each vehicle and are not available on all vehicles
- Rear O2’s Disabled
- Disables the Rear O2s and eliminates CEL caused by rear O2 removal.
- Fuel Injectors
- Allows you to adjust for different sized fuel injectors.
- CMCV Delete Plates
- Allows you to disable the CMCV (Charge Motion Control Valve) in your vehicles PCM to prevent a Check Engine light and other issues associated with removing the CMCV plates in your vehicle.
- Speed Limiter
- Allows you to Remove, Increase or Decrease the vehicles speed limiter.
- Idle Speed
- Allows you to Increase or Decrease the vehicles idle speed.
- Traction Control
- Allows you to disable the vehicles Traction Control without using the button in the vehicle.
- Spark Modification by RPM
- Allows you to Add or Remove Timing by RPM Range. (0-2000)(2000-4000)(4000-8000)
- WOT Fuel
- Allows you to Add or Remove Fuel at Wide Open Throttle.
- Shift Firmness Control
- Allows you to change the transmissions shift pressure. Controls how firm the shifts will feel. * Vehicles with Automatic Transmissions ONLY
- Axle Ratio
- Allow you to set the axle ratio (gear ratio) to correct shift patterns and the speedometer on your vehicle.
- Tire Size
- Allows you to set the tire size to correct shift patterns and the speedometer on your vehicle.
- Aftermarket Intake
- Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of available intake kits.
- Stores Stock Tune
- Stores a true copy of your vehicle’s stock file before programming. Used for warranty repairs and unlocking the programmer.
- Supports Custom Tune
- Supports and holds up to 3 custom tunes.
- Fan Control
- Lowers the Temperature at which the Fan turns on.
Custom Tune File Adjustment Options
- Idle Speed
- Allows you to Increase or Decrease the vehicles idle speed.
- Rev / RPM Limiter in Drive
- Allows you to Remove, Increase or Decrease the vehicles Rev / RPM limiter in Drive
- Rev / RPM Limiter Neutral
- Allows you to Remove, Increase or Decrease the vehicles Rev / RPM limiter in Neutral
- Speed Limiter
- Allows you to Remove, Increase or Decrease the vehicles speed limiter.
- Fan Control
- Lowers the Temperature at which the Fan turns on.
- WOT Fuel
- Allows you to Add or Remove Fuel at Wide Open Throttle.
- Axle Ratio
- Allow you to set the axle ratio (gear ratio) to correct shift patterns and the speedometer on your vehicle.
- Tire Size
- Allows you to set the tire size to correct shift patterns and the speedometer on your vehicle.
- WOT Shift Points by Gear
- Allows you to Increase or Decrease the Wide Open Throttle Shift points of each gear individually.
- Shift Firmness Contro
- Allows you to change the transmissions shift pressure. Controls how firm the shifts will feel. * Vehicles with Automatic Transmissions ONLY
Give us a call at 714-848-2170 M-F from 8-5 PST – We will answer your questions regarding the SCT SF3 Power Flash General Motors Programmer. Ask about Free Shipping!
Live locally? Feel free to stop by our location and meet us! OC DIESEL, INC. is located at 17242 Gothard Street, Huntington Beach, CA 92647 Suites A and B. In addition to carryingSCT SF3 Power Flash General Motors Programmer, we have a full service shop staffed with knowledgeable technicians who are ready to squash any Diesel Repair issues.
OC DIESEL Blog 